LUPAPA Thermostatic Dog House Heater with Anti-Bite Wires, Wall-Mounted Pet Heater with 2 Wind Speed Modes (300W/600W), Suitable for Pet House Stoves for Dogs Cats Chickens Hamsters

Product description

Waterproof switch

Adopt silicone protection switch, not only can waterproof, but also can prevent pets from accidental touching

Anti-frizz net

The back of the heater is equipped with an anti-frizz net, which can effectively prevent pet hair from getting tangled in the heater, and is easy to disassemble and clean.

Anti-bite cable

The 59-inch anti-bite power cord uses a steel spring to protect the power cord, which can effectively avoid pets from tearing and protecting them for safety.

Step 1

Use installation screws to secure the wall bracket to the wall. If the wall is a solid surface, please drill a hole first and then use installation screws and expansion plugs to secure the wall bracket.

Step 2

Ensure the black edge strip is snug against the body bracket, and the two notches align with the empty screw holes.

Step 3

Place the body bracket on the wall bracket, aligning the middle hole with the corresponding hole on the wall bracket. secure it in place using the handle screw, as shown in the diagram on the light.

Powerful and Low Noise Pet House Heater: LUPAPA pet house heater adopts 120V voltage, 300W and 600W two modes, which can be adjusted according to your preference, and the noise of the air supply is less than 45 decibels, which can provide a quiet and warm environment for your pet.
Thermostatic design: This pet house heater has a built-in thermostat, but the room temperature exceeds the safe temperature range will automatically stop working, when the room temperature is lower than the appropriate temperature the heater will restart heating, not only to keep your pets in a warm and comfortable environment, but also to extend the service life of the pet house heater.
Wall-mounted pet house heater: Our dog house heater is equipped with a separate safety bracket and rubber handle screws, easy to disassemble, we suggest to find a position slightly higher than your pet, then drill holes to install the bracket, and finally hang the heater on the heater can be installed; it can also be placed on the desktop and other flat surfaces.
Safe pet heater: The pet house heater uses in-line switching power supply and comes with 59 inches long anti-bite wire, the power button is far away from the body to avoid pets from accidentally touching the power on, and the steel spring is used to protect the power cord to prevent pets from tearing the power cord. To prevent pet hair from entering the heater, it is equipped with a removable magnetic anti-fur net to protect pets in all aspects.
Wide range of applications: not only for dog houses, cat cages, chicken coops, rabbit houses, pet pig houses, hamster houses, etc., but also for pregnant production and older pets to keep warm.